6ES7332-5HD01-0AB0

Product information

The 6ES7332-5HD01-0AB0 is a Siemens SIMATIC S7-300 analog output module: SM 332, isolated, 4 AO with voltage or current output and selectable resolution of 11 / 12 bits. Diagnostics are included, and the module can be removed or inserted with the backplane bus active.

The output ranges are what give this module its flexibility: voltage outputs of 0–10 V, 1–5 V and −10–+10 V, and current outputs of 0–20 mA, 4–20 mA and −20–+20 mA. Voltage outputs are short-circuit protected.

Technical specifications

Manufacturer / family	Siemens · SIMATIC S7-300
Product type	SM 332, analog output, isolated
Number of analog outputs	4
Resolution	11 / 12 bits, selectable
Output ranges — voltage	0–10 V · 1–5 V · −10–+10 V
Output ranges — current	0–20 mA · 4–20 mA · −20–+20 mA
Voltage output short-circuit protection	Yes — short-circuit current max. 25 mA
Current output, no-load voltage	Max. 18 V
Load voltage L+	24 V DC, reverse polarity protected
Current from load voltage (no load)	Max. 240 mA
Current from backplane bus	Max. 60 mA at 5 V DC
Power loss	3 W typical
Diagnostics	Included
Removal/insertion under backplane bus voltage	Yes

Specifications as published in Siemens product data for this article number. Verify against the nameplate of the unit offered to you.

Lifecycle status

Siemens product data identifies this article number as a spare part. Where an installation drives analog actuators, this module is often the single point that would take several loops offline if it failed, which is why matching spare availability for the exact ordering code is worth planning.

Typical applications

• Driving analog actuators, control valves and positioners from an S7-300 rack
• Analog setpoint output to drives or proportional valves, using voltage or current ranges
• Applications preferring 4–20 mA current loops for noise immunity over long cable runs
• Spare-part replacement on existing installations

Application examples describe typical uses of this product type. Suitability for your own installation must be confirmed against your engineering documentation.

Related references

• 6ES7331-7KF02-0AB0 — SM 331 analog input module, 8 AI
• 6ES7322-1BH01-0AA0 — SM 322 digital output module, 16 DO
• 6ES7392-1AM00-0AA0 — front connector, 40-pole, screw terminals

Before you order

To confirm a specific unit, please provide the complete ordering code, a nameplate photograph, the quantity required and the delivery destination. Availability, condition, quantity, lead time and commercial terms are confirmed individually after inquiry.

Frequently asked questions

How many analog outputs does the module have?
Four, each configurable for voltage or current output.

Which output ranges are supported?
0–10 V, 1–5 V, −10–+10 V, 0–20 mA, 4–20 mA and −20–+20 mA.

Are the outputs protected against short circuit?
The voltage outputs are short-circuit protected, with a maximum short-circuit current of 25 mA.

Can it be swapped with the rack powered?
Siemens states removal and insertion with active backplane bus is possible. Follow the current manual for the procedure.

What is the price and lead time?
Confirmed individually against current availability and quantity.