INDUSTRIAL AUTOMATION
E2EH-X12B1-M1
Omron
Omron E2EH-X12B1-M1. Reference photograph supplied by Zhenxin Industrial; the image may show the product, its nameplate or labelled packaging. Confirm the complete ordering code, revision, condition and required quantity before quotation.
This page identifies a sourcing reference. It does not guarantee continuous stock. Availability, condition, quantity, lead time, and commercial terms are confirmed after inquiry.
Copy the model and paste it into WhatsApp with your required quantity.
Reference details
- Manufacturer / brand
- Omron
- Model / reference
- E2EH-X12B1-M1
- Series / type
- Confirm against nameplate
- Condition
- Confirm with inquiry
- Quantity
- Confirm with inquiry
- Lead time
- Confirm with inquiry
Product information
Product Overview
The E2EH-X12B1-M1 is an Omron E2EH-series inductive proximity sensor built specifically for high temperature and washdown environments: M30 stainless-steel body, flush mounting, 12 mm sensing distance, PNP NO output and an M12 connector.
This page is written for buyers and maintenance engineers sourcing E2EH-X12B1-M1 as a new part or a replacement. Every specification below is taken from Omron’s own published catalogue data for this model; no third-party or estimated figures are used, and where Omron publishes two different figures for the same parameter, both are shown.
Omron catalogue position: Sensing › Inductive Sensors › E2EH. Official catalogue code for this model: E2EH-X12B1-M1.
Why Buyers Specify This Model
Stainless-steel housing for high-temperature washdown
Omron’s catalogue gives a stainless steel housing with heat and detergent resistance, which is the reason the E2EH exists — it is the variant selected for food, beverage and pharmaceutical machines that are cleaned in place, not the general-purpose E2E.
M30 flush, 12 mm sensing distance
Flush mountable in a 30 mm thread with 12 mm nominal sensing distance and 43 mm thread length, so it sits in a standard M30 bracket without a protruding barrel.
M12 connector, IP67/IP69K
Connection is by M12 connector rather than a fixed cable, which is what you want on a machine that gets hosed down — the sensor can be replaced without cutting the conduit. Protection class is IP67/IP69K.
PNP normally open
Output type is PNP with NO operation. If your input card is NPN, state it on the enquiry and we will identify the correct model in the same range rather than leave you to rewire.
Technical Specifications (Official Omron Catalogue Data)
| Parameter | Official value |
|---|---|
| Size | M30 |
| Mounting type | Flush |
| Sensing distance | 12 mm |
| Output type | PNP |
| Operation mode | NO |
| Connection method | Connector M12 |
| Material housing | Stainless steel |
| Cable specifications | – |
| Overall length of sensor | 58 mm |
| Thread length | 43 mm |
| Features | Heat and detergent resistance |
| Degree of protection (IP) | IP67/IP69K |
Source: Omron official product catalogue data for E2EH-X12B1-M1, published at industrial.omron.eu. Values are reproduced as published by Omron. Where the official data carries a condition or footnote, the headline figure is shown — request the official datasheet for the qualified figure.
Lifecycle & Availability
Omron’s official product data for this model carries no end-of-production or discontinuation notice — it is listed as a current catalogue item. That is the lifecycle status as published by Omron, not a stock statement on our side.
Availability, condition of supply and lead time are quoted per enquiry because they depend on quantity and on where the goods are held. Tell us the quantity and the date you need it and we will answer with a firm position rather than a promise.
Official Documentation
These are Omron’s own documents for this model and its family. Download them directly from Omron’s document server:
Full technical detail — conversion periods, wiring diagrams, derating and installation requirements — is in these documents. If you need a specific figure we do not show here, ask and we will point you to the exact page rather than paraphrase it.
Ordering This Part
Send us the full catalogue number E2EH-X12B1-M1, the quantity, your delivery address and the date you need the goods. If the part is a replacement, attach a photograph of the existing unit’s nameplate — it removes any doubt about the revision, the output type or the supply voltage, which are the three things that most often cause a wrong part to be shipped.
We do not publish stock, condition or lead time as fixed figures here, because they change: they are quoted per enquiry against the quantity and date you actually need. If a machine is down, say so and give us the required window — that is the information that determines how we source it.
Frequently Asked Questions
Why is the E2EH more expensive than a standard E2E?
Because of the body: a stainless-steel, heat- and detergent-resistant sensor is a different product from a nickel-plated brass general-purpose sensor. In a plant that washes down equipment daily, the standard sensor is the false economy.
What is the sensor length and thread?
Overall length 58 mm with 43 mm of thread, M30 thread, M12 connector. These are the mounting dimensions to check against your bracket.
Is it shielded / flush mountable?
Yes, Omron’s catalogue specifies flush mounting, which allows the sensor to be embedded in the machine surface without leaving a non-metallic gap.
Availability?
Current production; no end-of-production notice in Omron’s official catalogue data.
MODEL INQUIRY
Request this
reference.
Include a nameplate photo or full specification when revisions may differ.