ZP3E-125BMN

Product information

Product Overview

SMC lists ZP3E-125BMN under ZP3E Series Vacuum Pad Flat Type Pad/Bellows Type Pad With Groove Pad Unit. The manufacturer’s own product-number check resolves this exact part number and returns the configuration breakdown below, so every code position on the label can be matched against SMC’s published data before the part is ordered.

SMC files this part under the catalogue entry High Rigidity Vacuum Pad (Vacuum Suction Cup) (official series page ZP3E_N-E).

The manufacturer’s description of the series, its official configuration breakdown, the associated maintenance part numbers and any lifecycle notice are reproduced below in full and unchanged.

Why Buyers Specify This Model

This is how SMC itself describes the series this part number belongs to:

• Stable suction position, Improved ease of removal
• Pad form: Flat type with groove, Bellows type with ribs and groove
• Mounting: Male thread, Female thread
• Vacuum inlet direction: Vertical, Lateral
• Vacuum inlet: Male thread, Female thread
• Buffer Without, With [Buffer stroke [mm]: 10, 30, 50]

These points are reproduced from SMC’s own description of the series this part number belongs to. They are the manufacturer’s claims, not our interpretation.

Technical Specifications (Official SMC Data)

SMC’s product-number check returns the following configuration for ZP3E-125BMN. Each row is one position of the part number, exactly as SMC publishes it.

Code position	Value	Official meaning
Pad Diameter	125	Φ125
Pad Type	BM	Bellows Type With Groove
Pad Material	N	NBR
Plate	–	None

Source: SMC official product number check for ZP3E-125BMN. Values are reproduced unchanged; they are not converted, rounded or paraphrased.

Series Specifications (Official SMC Data)

SMC publishes the following series comparison data for the ZP3E_N-E family. It shows what the manufacturer states for each series in the family, so the values can be compared across sizes.

Series	Pad form	Pad diameter(mm)
ZP3E	Flat type with groove	φ32,φ40,φ50,φ63,φ80,φ100,φ125
ZP3E	Flat type with groove (Ball joint type)	φ32,φ40,φ50,φ63,φ80,φ100,φ125
ZP3E	Bellows type with ribs and groove	φ32,φ40,φ50,φ63,φ80,φ100,φ125
ZP3E	Bellows type with ribs and groove (Ball joint)	φ32,φ40,φ50,φ63,φ80,φ100,φ125

Source: SMC official series page for ZP3E_N-E.

Ordering Information

Item	Official data
Manufacturer	SMC Corporation
Full part number	ZP3E-125BMN
Official series	ZP3E Series Vacuum Pad Flat Type Pad/Bellows Type Pad With Groove Pad Unit
Catalogue entry	High Rigidity Vacuum Pad (Vacuum Suction Cup)
Official series page	ZP3E_N-E

A complete SMC part number must be ordered. SMC’s product-number check only resolves the part number in full: dropping a suffix such as the port size or the electrical entry produces a code the manufacturer does not list, so the description above should be used to confirm every position before ordering.

Lifecycle and Availability

SMC’s product-number check for ZP3E-125BMN carries no discontinuation notice, so the manufacturer is not flagging this part number as end-of-life at the time of writing.

Availability, lead time and stock are commercial matters. We confirm them against SMC’s current supply position for the exact part number you need – please send an enquiry rather than assuming the part is on the shelf.

Official Documentation

Every value on this page can be verified against SMC’s own documentation. The links below go directly to the manufacturer:

Document	Official link
Vacuum Pads/Precautions	https://www.smcworld.com/catalog/VacuumPad-en/pdf/VPad-Precautions_en.pdf
Series Variations	https://www.smcworld.com/catalog/VacuumPad-en/pdf/VPad-common_en.pdf
Model Selection	https://www.smcworld.com/catalog/BEST-technical-data-en/pdf/Vacuum-Common_en.pdf
Standard: Mounting Bracket Assembly (p.237-240)	https://www.smcworld.com/catalog/VacuumPad-en/pdf/VPad-Assy-p237-240_en.pdf
Ball Joint: Mounting Bracket Assembly (p.241-244)	https://www.smcworld.com/catalog/VacuumPad-en/pdf/VPad-Assy-p241-244_en.pdf
Official SMC document	https://www.smcworld.com/upfiles/pl/M-E03-3-01.pdf
Official SMC document	https://www.smcworld.com/upfiles/pl/M-E03-3-07.pdf
SMC official series page for ZP3E_N-E	https://www.smcworld.com/webcatalog/en-jp/series/ZP3E_N-E
SMC official product number check for ZP3E-125BMN	https://www.smcworld.com/webcatalog/s3s/en-jp/detail/?partNumber=ZP3E-125BMN

Ordering This Part

Send us the full part number ZP3E-125BMN together with the quantity, and we will come back with price, lead time and shipping. Partial part numbers cannot be quoted, because SMC lists each configuration under its own part number.

If your drawing or bill of materials shows a different part number for the same function, send that as well – we will check it against SMC’s data and tell you what the difference is before you commit.

Frequently Asked Questions

How do I read the part number ZP3E-125BMN?

SMC’s product-number check breaks the code down position by position. The breakdown is reproduced in full in the Technical Specifications table above, including what each letter and figure means.

Is ZP3E-125BMN still available?

SMC’s product-number check returns this part number without a discontinuation notice at the time of writing. Stock and lead time are confirmed per order, so please enquire rather than assume availability.