6ES7153-2BA10-0XB0

Product information

The 6ES7153-2BA10-0XB0 is a Siemens SIMATIC DP interface module for distributed I/O: ET 200M IM 153-2 High Feature. It connects an ET 200M station to PROFIBUS DP, manages up to 12 S7-300 modules, supports redundancy, and provides time stamping suitable for isochronous mode.

The High Feature designation is what distinguishes this module from the basic ET 200M interface variants. It brings redundancy capability, time stamping with 1 ms accuracy at up to 8 modules and 10 ms at up to 12 modules, support for 64-channel modules at 32 signals per slot, and the Device Initiative function for Drive ES and Switch ES. Siemens notes that compatibility notes in the manual should be observed.

Technical specifications

Manufacturer / family	Siemens · SIMATIC ET 200M
Product type	IM 153-2 DP HF
Firmware version	V6.0.0
Function	PROFIBUS DP interface module for ET 200M distributed I/O
Modules per DP device interface, max.	12
Redundancy	Supported
Time stamping accuracy	1 ms up to 8 modules; 10 ms up to 12 modules
Stampable digital inputs, max.	128 (max. 128 signals per station, max. 32 signals per slot)
Message buffers	15 buffers × 20 messages
Time format / resolution	RFC 1119 / 0.466 ns
Address space per module	244 byte inputs / 244 byte outputs
Supply voltage	24 V DC (permissible 20.4–28.8 V DC)
Current consumption, max.	650 mA with 24 V DC supply
Output current, backplane bus	Max. 1.5 A at 5 V DC
Power loss	5.5 W typical

Specifications as published in Siemens product data for this article number. Verify against the nameplate of the unit offered to you.

Lifecycle status

Siemens product data identifies this article number as a spare part. Existing ET 200M stations built on the IM 153-2 High Feature therefore depend on surplus and secondary-market supply for replacement head modules — which is why an exact ordering-code match, including firmware where relevant, matters for these parts.

Typical applications

• PROFIBUS DP distributed I/O stations built on S7-300 style I/O modules
• Redundant configurations where continuity of the station is required
• Time-stamped signal acquisition for sequence-of-events or diagnostics purposes
• Isochronous motion applications on the PROFIBUS DP network

Application examples describe typical uses of this product type. Suitability for your own installation must be confirmed against your engineering documentation. Compatibility notes in the current Siemens manual should be reviewed for the specific station configuration.

Related references

• 6ES7155-6AU01-0BN0 — ET 200SP PROFINET interface module IM 155-6 PN ST
• 6ES7317-2EK14-0AB0 — S7-300 CPU 317-2 PN/DP, a typical DP master for this station
• Other IM 153-2 variants — send your requirement and we will check the specific ordering code

Before you order

To confirm a specific unit, please provide the complete ordering code, firmware version, a nameplate photograph, the quantity required and the delivery destination. Availability, condition, quantity, lead time and commercial terms are confirmed individually after inquiry.

Frequently asked questions

What does High Feature add over the standard version?
Redundancy capability, time stamping, expanded quantity structure for HART auxiliary variables, support for 64-channel modules at 32 signals per slot, and Device Initiative for Drive ES and Switch ES.

How many modules can the station carry?
Up to 12 S7-300 modules per DP device interface.

What is the time stamping accuracy?
1 ms at up to 8 modules, and 10 ms at up to 12 modules.

Is this module still produced?
Siemens lists it as a spare part. Confirm availability for the specific revision you need before committing to a requirement.

Can it be used on PROFINET?
No. This is a PROFIBUS DP interface module. ET 200SP IM 155-6 PN ST is the PROFINET equivalent in a different platform.

What is the price and lead time?
Confirmed individually against current availability for the specific revision and quantity.